As an Amazon Associate I earn from qualifying purchases.

Panasonic LUMIX GH6 Mirrorless Camera Body + 12-60mm F2.8-4 Leica Lens DC-GH6LK 4K Filmmaker's Bundle with DJI RS 3 Mini Gimbal Stabilizer Kit + Deco Gear Photography Backpack + 64GB Card & Software

Panasonic USA Authorized - Includes FULL USA Warranty | Meet the New LUMIX GH6 - Iconic. Unparalleled. Ready for the Future. Higher Resolution and Bit Rates than Ever Before: 25MP Sensor and Venus Engine with 100MP Hand-Held High Resolution Shot; 5.7K 60p, 4K 120p 10-bit video and all recording modes are no time limit
Incredible Image Quality and Versatility: Internal recording in Apple ProRes 422 HQ and 422 to deliver high image quality at low compression; Pre-installed V-Log/V-Gamut and +13-stops of dynamic range with Dynamic Range Boost
Unbelievably Stable, Even in Low Light: Powerful 5-axis Dual I.S. 2 provides up to 7.5-stops of correction; Full-HD High frame rate video at 300fps (12.5x) slow motion | The category-defining camera—powerful, reliable, unlimited—now with higher resolution and bit rates than ever before, even more robust image stabilization, and other important upgrades for pro-level quality
CAMERA INCLUDES: Panasonic LUMIX GH6 25.2MP Mirrorless Micro Four Thirds Camera Body - DC-GH6LK | LEICA DG VARIO-ELMARIT 12-60mm F2.8-4.0 ASPH./POWER O.I.S. Lens | Lens Hood | Front Lens Cap | Rear Lens Cap | Battery Pack DMW-BLK22 | Battery Charger | AC Adaptor | USB Connection Cable | BNC Conversion Cable (for TC IN/OUT) | Cable Holder | Shoulder Strap | Body Cap | Eye Cup | Hot Shoe Cover | Flash Synchro Socket Cap | Panasonic USA Authorized Warranty
BUNDLE INCLUDES: DJI RS 3 Mini Lightweight Travel Ronin Gimbal Stabilizer for Camera and Lens Combo up to 4.4 lbs CP.RN.00000294.01 | USB-C Charging Cable | Multi-Camera Control USB-C Cable | Quick-Release Plate | Mini Tripod | Screw Kit | Deco Gear Photography Backpack for Cameras Lenses & Accessories With 15" Laptop Compartment | Lexar 64GB Professional 1800x UHS-II SDXC Memory Card (GOLD Series) | Corel Paint Shop Pro Software (Digital Download) | VideoStudio SE Software (Digital Download)

Panasonic LUMIX GH6 Mirrorless Camera Body + 12-60mm F2.8-4 Leica Lens DC-GH6LK 4K Filmmaker’s Bundle with DJI RS 3 Mini Gimbal Stabilizer Kit + Deco Gear Photography Backpack + 64GB Card & Software

Are you a professional filmmaker or photographer looking for a reliable and versatile camera? Look no further than the Panasonic LUMIX GH6 Mirrorless Camera Body + 12-60mm F2.8-4 Leica Lens DC-GH6LK 4K Filmmaker’s Bundle. This iconic camera offers unparalleled features and is ready to take your creative endeavors to the next level. In this review, we will explore the advantages and disadvantages of this powerful camera bundle, providing you with valuable insights to help you make an informed decision.

Advantages of the Panasonic LUMIX GH6 Mirrorless Camera Body + 12-60mm F2.8-4 Leica Lens DC-GH6LK 4K Filmmaker’s Bundle

1. Higher Resolution and Bit Rates: The GH6 features a 25MP sensor and Venus Engine with 100MP Hand-Held High Resolution Shot capability. This allows for stunningly detailed images and videos. Additionally, the camera offers 5.7K 60p and 4K 120p 10-bit video recording, providing you with exceptional video quality.

2. Incredible Image Quality and Versatility: With internal recording in Apple ProRes 422 HQ and 422, the GH6 delivers high image quality at low compression. The camera also comes with pre-installed V-Log/V-Gamut and offers +13-stops of dynamic range with Dynamic Range Boost, ensuring that you capture every detail in your shots.

3. Unbelievably Stable, Even in Low Light: The GH6 is equipped with a powerful 5-axis Dual I.S. 2 image stabilization system, providing up to 7.5-stops of correction. This ensures that your shots remain steady, even in challenging shooting conditions. Additionally, the camera offers Full-HD high frame rate video at 300fps (12.5x) slow motion, allowing you to capture stunning slow-motion footage.

Disadvantages of the Panasonic LUMIX GH6 Mirrorless Camera Body + 12-60mm F2.8-4 Leica Lens DC-GH6LK 4K Filmmaker’s Bundle

1. Limited Recording Time: Although the GH6 offers impressive video recording capabilities, it is important to note that there is a time limit for all recording modes. This can be a limitation for filmmakers who require longer continuous recording sessions.

2. Learning Curve: The GH6 is a feature-rich camera, and mastering all its capabilities may require some time and effort. Beginners may find it overwhelming initially, but with practice and exploration, they can unlock the camera’s full potential.

Summary

The Panasonic LUMIX GH6 Mirrorless Camera Body + 12-60mm F2.8-4 Leica Lens DC-GH6LK 4K Filmmaker’s Bundle is a category-defining camera that offers higher resolution and bit rates, robust image stabilization, and other important upgrades for pro-level quality. With its exceptional image quality, versatility, and stability, it is an excellent choice for professional filmmakers and photographers. While it may have some limitations, such as a limited recording time and a learning curve, the advantages outweigh the disadvantages, making this camera bundle a valuable investment for creative professionals.

Pros and Cons

Pros:

Higher resolution and bit rates

Incredible image quality and versatility

Unbelievably stable, even in low light

Cons:

Limited recording time

Learning curve

Question and Answer Section

Q: Can I use other lenses with the Panasonic LUMIX GH6 Mirrorless Camera?

A: Yes, the GH6 is compatible with a wide range of Micro Four Thirds lenses, allowing you to choose the lens that best suits your shooting needs.

Q: Does the camera bundle come with a memory card?

A: Yes, the bundle includes a 64GB Lexar Professional 1800x UHS-II SDXC memory card, providing ample storage space for your photos and videos.

Q: Is the DJI RS 3 Mini Gimbal Stabilizer easy to use?

A: Yes, the DJI RS 3 Mini Gimbal Stabilizer is designed to be lightweight and easy to use. It offers intuitive controls and provides exceptional stabilization for your camera.

Q: Can I charge the camera and gimbal simultaneously?

A: Yes, the bundle includes a USB-C charging cable, allowing you to charge both the camera and gimbal at the same time for added convenience.

If you want to find this product on Amazon’s website, search with this exact ASIN number: B0BVPS1MD3, or you can click the link below:

Panasonic LUMIX GH6 Mirrorless Camera Body + 12-60mm F2.8-4 Leica Lens DC-GH6LK 4K Filmmaker's Bundle with DJI RS 3 Mini Gimbal Stabilizer Kit + Deco Gear Photography Backpack + 64GB Card & Software

Panasonic USA Authorized - Includes FULL USA Warranty | Meet the New LUMIX GH6 - Iconic. Unparalleled. Ready for the Future. Higher Resolution and Bit Rates than Ever Before: 25MP Sensor and Venus Engine with 100MP Hand-Held High Resolution Shot; 5.7K 60p, 4K 120p 10-bit video and all recording modes are no time limit
Incredible Image Quality and Versatility: Internal recording in Apple ProRes 422 HQ and 422 to deliver high image quality at low compression; Pre-installed V-Log/V-Gamut and +13-stops of dynamic range with Dynamic Range Boost
Unbelievably Stable, Even in Low Light: Powerful 5-axis Dual I.S. 2 provides up to 7.5-stops of correction; Full-HD High frame rate video at 300fps (12.5x) slow motion | The category-defining camera—powerful, reliable, unlimited—now with higher resolution and bit rates than ever before, even more robust image stabilization, and other important upgrades for pro-level quality
CAMERA INCLUDES: Panasonic LUMIX GH6 25.2MP Mirrorless Micro Four Thirds Camera Body - DC-GH6LK | LEICA DG VARIO-ELMARIT 12-60mm F2.8-4.0 ASPH./POWER O.I.S. Lens | Lens Hood | Front Lens Cap | Rear Lens Cap | Battery Pack DMW-BLK22 | Battery Charger | AC Adaptor | USB Connection Cable | BNC Conversion Cable (for TC IN/OUT) | Cable Holder | Shoulder Strap | Body Cap | Eye Cup | Hot Shoe Cover | Flash Synchro Socket Cap | Panasonic USA Authorized Warranty
BUNDLE INCLUDES: DJI RS 3 Mini Lightweight Travel Ronin Gimbal Stabilizer for Camera and Lens Combo up to 4.4 lbs CP.RN.00000294.01 | USB-C Charging Cable | Multi-Camera Control USB-C Cable | Quick-Release Plate | Mini Tripod | Screw Kit | Deco Gear Photography Backpack for Cameras Lenses & Accessories With 15" Laptop Compartment | Lexar 64GB Professional 1800x UHS-II SDXC Memory Card (GOLD Series) | Corel Paint Shop Pro Software (Digital Download) | VideoStudio SE Software (Digital Download)

Here are top selling related products:

Bestseller No. 1

DJI RS 3 Mini, 3-Axis Gimbal Stabilizer for Cameras Canon/Sony/Panasonic/Nikon/Fujifilm, 2 kg (4.4 lbs) Tested Payload, Bluetooth Shutter Control, Camera Gimbal with Native Vertical Shooting

795g (1.75lbs) Lightweight and Portable - RS 3 Mini is an ultra-compact camera stabilizer convenient for travel. Weighing only 795g (1.75 lbs), RS Mini 3 is easy to hold for extended shooting.
Wide-Ranging Compatibility - With strong, high-torque motors, the RS 3 Mini camera stabilizer possesses a load capacity of up to 2 kg (4.4 lbs), enabling a wide range of camera and lens combinations.
Bluetooth Shutter Control - Your camera automatically reconnects after the initial pairing. Easily control photo capture and video recording via the gimbal.
3rd-Gen RS Stabilization Algorithm - Get pro-level image stabilization while shooting low-angle shots or filming in flashlight mode.
Native Vertical Shooting - Conveniently shoot content for social media, just mount the quick-release plate to the vertical arm, and you're set.

SaleBestseller No. 2

NEEWER Lumix GH6 Camera Cage, Aluminum Video Rig with HDMI Cable Clamp, NATO Rail, 1/4" 3/8" Threads, Cold Shoe, Arca Type QR Baseplate Compatible with Panasonic Lumix GH6 DJI RS3 Pro RSC2 RS2, CA055

【Protective Cage for Lumix GH6】 This GH6 camera cage is only compatible with Panasonic Lumix GH6. It can work as a video rig for accessory expansion, a camera protective frame for scratch and shock resistance, and a camera stabilizer that helps you shoot sharp and smooth video footage. Ideal for YouTube/TikTok vlogging, live streaming, filmmaking, photography, and more
【Firm Installation & Full Access】 The cage firmly lock the camera with a 1/4" bottom screw and two anti twist pins. This formfitting cage ensures full access to the buttons, ports, LCD flip screen, and battery compartment. A nonslip rubber pad protects the camera from scratches
【Arca Type Equipment Transfers】 The Arca type quick release baseplate enables you to quickly transfer the camera from a handheld stabilizer to a tripod since it is seamlessly compatible with DJI RS 2 RSC 2 RS 3 RS 3 Pro gimbals and most tripod heads. You can mount this GH6 video rig to a tripod in both horizontal and vertical orientations
【Detachable HDMI Cable Clamp】 The removable cable clamp can secure an HDMI cable and a USB type C cable for stable signal transfers. The clamp features 2 screws, each with a rubber mat to protect the cable connector from scratches. Also included is a double head screwdriver attached under the cage via magnets for installing for tightening every screw on the cage
【Diverse Accessory Connection】 Multiple 1/4" threads, 3/8" threads with locating holes, cold shoes, and built in NATO rails let you connect our CM14 Pro mini vlog microphone, CM28 wireless Lavalier Mic, CM22 Lapel Mic for on the go audio recording, MA002 MA004 monitor mount for our F500 F400 F100 monitor, PL81 RGB62 mini LED light, CA017H VS105 side handle, CA007 ARRI top handle, ST15 magic arm, or CA070 neck strap with 1/4" D rings for weight reducing

Bestseller No. 3

DJI RS 3, 3-Axis Gimbal for DSLR and Mirrorless Camera Canon/Sony/Panasonic/Nikon/Fujifilm, 3 kg (6.6 lbs) Payload, Automated Axis Locks, 1.8" OLED Touchscreen, Professional Camera Stabilizer

3 kg (6.6 lbs) Tested Payload - With a weight of just 1.3 kg (includes gimbal, battery handle, and double-layer quick release plates), DJI RS 3 offers a max tested payload of 3 kg (6.6 lbs).
Automated Axis Locks - The three axes of DJI RS 3 can be automatically locked and unlocked with the simple press of the power button, significantly improving the speed and efficiency of transitions and storage.
3rd-Gen RS Stabilization Algorithm - With the new-generation RS stabilization algorithm, RS 3's anti-shake performance is improved by 20%, making low-angle and dynamic shots easier than ever.
Bluetooth Shutter Button - RS 3 supports wireless shutter control, eliminating the need for a control cable. Cameras will pair automatically after the initial connection, saving users time and effort when shooting.
1.8" OLED Touchscreen - DJI RS 3 features a 1.8-inch OLED touchscreen for quick access to most of the setting functions found on the Ronin app. It also features a new user interface that is intuitive and precise.

SaleBestseller No. 4

DJI Ronin-SC, 3-Axis Camera Stabilizer, up to 2kg (4.4lbs) Payload, Lightweight Design, Dynamic Stability, Automated Features, Available for Canon/Sony/Panasonic/Nikon/Fujifilm

Lightweight and Compact - Opening possibilities for filmmakers and content creators in almost any situation, Ronin-SC was built to go anywhere.
Tracks the Action - The Ronin app, and Ronin-SC work together seamlessly to achieve smooth, precise gimbal movement at all times, allowing you to focus more on creating the shot that matches your vision.
Dynamic Stability - Even in action-packed scenes, Ronin-SC gives a perfectly stable shot. Continuous stabilization makes Ronin-SC more effective in fast follows, sudden motions, and even complete changes in direction.
Automated Features - Ronin-SC offers a suite of advanced capturing features to unleash your imagination.
Easy to Handle - The buttons and trigger are easy to reach for every essential control. A flared battery grip makes extended holding easier and slip-resistant, letting you capture moments throughout the day.

Bestseller No. 5

SMALLRIG RS 3 Mini Quick Release Clamp for DJI RS 3 Mini, for Arca-Swiss Mount Clamp - 4195

【For DJI RS 3 Mini】SmallRig mount clamp is specially designed for DJI RS 3 mini gimbal. This mount clamp supports camera cage with a bottom plate for Acra-Swiss.
【Lower Center of Gravity】When you install the quick release clamp, the overall center of gravity drops by 10mm, making it easier to level and be compatible with heavier cameras.
【Quick Install】The mount clamp adopts a vertical installation structure, which does not need to be slid in, and the installation efficiency is higher. They can be mounted by sliding in from side or top. The rig also helps quickly switch between vertical and horizontal shooting.
【Anti-off Design】This product adopts two anti-off designs, which are stable, safe and efficient, and you can use it with confidence.
【Wide Compatibility】This mount clamp is designed to support various other cameras, such as for Sony FX3 with 24-70mm lens, for Canon R5 with 24-70mm lens, for FUJIFILM X-T5 with 16-55mm lens and GH6 with 12-60mm lens.

Bestseller No. 6

SmallRig Plastic Lightweight Adjustable Handle Sling Handgrip Only for DJI RS 3 Mini Gimbal Handheld Stabilizer, with NATO Clamp and Cold Shoe Mount - 4197B

【Only For DJI RS 3 Mini】SmallRig Sling Handle 4197B is specially designed for DJI RS 3 mini gimbal. This briefcase handle is designed to reduce arm fatigue during low angle shooting and mounted it onto RS 3 mini would not shift the center gravity.
【180 Degree Adjustment】Offering 180° adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. This gimbal handle for DJI Ronin RS 3 mini has a pretty good and sturdy grip.
【Portable and Compact】The compact handgrip weighs only 220g but can bear as much as 6kg. And low-angle shooting makes the arm easier and the camera moves more freely. It's really compatible gimbal looking for extra stability or to lower it down to underslung / briefcase mode.
【Quick Release Clamp】The grip mounts onto the gimbal using a NATO clamp. Also, the quick release NATO rail features an anti-removal stud to ensure a safe and quick operation. The delicate and compact handgrip works perfectly with the gimbal which is a comfortable accessories for DJI RS 3 mini .
【Multiple Mounting Points】Multiple 1/4"-20 threads are built-in on the handgrip which allows for mounting Magic Arm 3873. With two cold shoe mounts on top and side of the handgrip, it can be mounted with Monitor Mount 2905B, wireless receiver, video transmission and other equipment.

SaleBestseller No. 7

DJI RS 3 Pro, 3-Axis Gimbal for DSLR and Cameras Canon/Sony/Panasonic/Nikon/Fujifilm/BMPCC, Automated Axis Locks, 4.5 kg (10lbs) Payload, LiDAR Focus Camera Stabilizer

Automated Axis Locks - The three axes of DJI RS 3 Pro can be automatically locked and unlocked with the simple press of the power button, significantly improving the speed and efficiency of transitions and storage.
Extended Carbon Fiber Axis Arms - Provides more sufficient leveling space for professional cameras, and can carry professional combinations such as Sony FX6 and Canon C70 with 24-70 mm F2.8 lens, expanding users' creative possibilities.
4.5 kg (10lbs) Tested Payload - With a weight of just 1.5 kg (includes gimbal, battery handle, and dual-layer quick release plates), DJI RS 3 Pro offers a max tested payload of 4.5 kg (10 lbs).
Long-Range O3 Pro Video Transmission [2] - Supports 6km/20,000ft [4] video and audio transmission with ultra-low latency, impressive stability, and extensive coordinated control features.
Dynamic & Versatile Solution - Extensive ports and DJI RS SDK protocol allow RS 3 Pro to connect to a wide variety of accessories and work with vehicle mounts, jibs, Steadicams, and more.

Bestseller No. 8

SmallRig Extended Vertical Arm for DJI RS 3 Mini, Extension Mount Plate for DJI RS 3 Mini - 4196

【For DJI RS 3 Mini】SmallRig Extended Vertical Arm 4196 is specially designed for DJI RS 3 mini gimbal. Related products: SmallRig Mount Plate 4195.
【Lower Center of Gravity】The extension arm is appropriately 15mm longer than the original one, lowering the center of gravity of camera, and would not block camera movement.
【Quickly Switch】The mount plate has a clear auxiliary leveling scale, which is more convenient for leveling and switching between horizontal and vertical shooting.
【Anti-off Design】This product adopts anti-off designs, which are stable, safe and efficient, and you can use it with confidence.
【Wide Compatibility】This mount plate is designed to support various other cameras, such as for Sony FX3 with 24-70mm lens, for Canon R5 with 24-70mm lens, for FUJIFILM X-T5 with 16-55mm lens and GH6 with 12-60mm lens.

Bestseller No. 9

SmallRig Adjustable Sling Handgrip Gimbal Sling Handle for DJI RS 4, RS 4 Pro, RS 3 Mini, RS 3, RS 3 Pro, RS 2, RSC 2 Stabilizer, 13.2lb Load, Ergonomic Grip for Low Angle Shots - 3028C

ONLY For DJI RS 4 / RS 4 Pro / RS 3 Mini / RS 3 / RS 3 Pro / RS 2 / RSC 2: SmallRig Sling Handgrip 3028C designed for the DJI RS series reduces arm fatigue and adds stability to low-angle gimbal shots. It can support up to 8 kg / 17.6 lbs and adopts a longer arm bracket, making it more versatile for RS 3 Pro and larger camera setups.
Optimized Ergonomic Design: This gimbal sling handle has been updated with a curved design that better fits ergonomics. Its grip length has been increased with finger stops, providing a more comfortable and secure grip for larger hands. Constructed with a combo of silicone and aluminum alloy, it is lightweight but strong. Its sleek design and compact structure match perfectly with the stabilizer.
Quick Release Features: It securely attaches to your gimbal with a NATO clamp, with anti-removal stud for safe and quick operation. On this version we integrate a NATO rail on the side, allows for mounting SmallRig 3026B to provides a good spot for your monitor. Additionally, a QD socket mount is added, providing the option to mount a QD neck (not included) or shoulder strap for additional support.
180 Degree Adjustment: SmallRig gimbal handgrip offers 180° adjustment through its built-in rosette joint, giving you the flexibility to shoot from various angles and reducing the strain on your arm. The rosette joint can be detached, allowing you to use the handgrip on its own as a rosette handgrip.
Abundant Mounting Points: It features multiple 1/4"-20 and 3/8"-16 threads for ARRI, enabling you to mount magic arms 3874 or monitor mounts 2903B. Besides, two cold shoe mounts are situated on top and side, allowing you to attach a wireless mic or video transmitter.

Bestseller No. 10

Hersmay RS3 Mini Quick Release Plate for DJI Ronin RS3 Mini Stabilizer Upper Quick Release Plate for DJI RS3 PRO/ RS3/ RS2/ RSC2 Gimble Stabilizer for Arca Swiss Tripod Monopod

Specially designed for Sony Canon Nikon DSLR Mirrorless Camera to mounting on DJI Ronin RS2 RSC2 RS3 RS3PRO RS3 mini RS3 Pro Gimbal Stabilizer.
With 1/4"-20 screw for DSLR mirrorless camera,1/4" screw can move by 22.3mm/0.89in.D-ring lock at bottom for easily attaching and detaching camera.Also compatible with arca swiss clamp.
Made of high quality CNC precision aluminum alloy and surface processed with hard anodized oxidation treatment, it is durable and lightweight.
Durable rubber cushions to stop expensive slips.Screwless designed Heavy Duty D-Ring to attach/detach quickly from your camera.
Package includes: 1 x QR plate,1x 1/4"-20 screw