As an Amazon Associate I earn from qualifying purchases.
- Qi Certified Wireless Charging: Qi wireless charging delivers up to 10W of power to compatible Qi-enabled smartphones on contact without the need for additional power cables. Power adapter not included.
- Quiet Operation: The Auto Sense 2 features an Integrated servo motor operates at a minimal noise level to achieve a pleasant mounting experience. An internal battery allows the release buttons and clamping arms to operate for up to an hour after your vehicle is shut off.
- Fully Adjustable: The telescopic arm extends from 4.5” to 6.75” and rotates an a 260° arc; the mount head rotates, swivels, and titles a full 360°; and the bottom foot easily extends to accommodate extra large phones in both portrait and landscape mode.
- Case Compatibility: The wireless charging feature works with Qi compatible devices and cases up to 6mm thick. For the most efficient wireless charging experience, we recommend connecting your phone without a case.
- car phone holder mount cell phone holder car phone holders for car phone mount for car holder cellphone car cell phone holder for car mobile phone holder car mount for phone cell phone automobile cradles cell phone car holder mount porta celular
iOttie Auto Sense 2 Dash & Windshield Car Phone Holder with Qi Wireless Charging
The iOttie Auto Sense 2 Dash & Windshield Car Phone Holder with Qi Wireless Charging is an innovative and convenient accessory for your car. This phone holder offers a range of features that make it a must-have for any driver. In this review article, we will explore the various applications of this product and discuss its advantages.
Applications
1. Google Pixel
The iOttie Auto Sense 2 Dash & Windshield Car Phone Holder is compatible with Google Pixel smartphones. This means that you can easily mount your Google Pixel device on your car’s dashboard or windshield using this phone holder. The automatic mounting system ensures a secure hold, allowing you to focus on the road without worrying about your phone.
2. iPhone
iPhone users can also benefit from the iOttie Auto Sense 2 Dash & Windshield Car Phone Holder. The wireless charging feature, combined with the secure clamping mechanism, makes it a convenient and safe option for iPhone users. You can easily charge your iPhone wirelessly while keeping it within reach.
3. Galaxy
If you own a Samsung Galaxy smartphone, the iOttie Auto Sense 2 Dash & Windshield Car Phone Holder is a great choice. The Qi wireless charging feature ensures that your Galaxy device is always ready to use. The adjustable arm and mount head allow you to position your phone at the perfect angle for optimal visibility.
4. Huawei
Huawei smartphone users can also enjoy the benefits of the iOttie Auto Sense 2 Dash & Windshield Car Phone Holder. The automatic clamping mechanism securely holds your Huawei device in place, even during bumpy rides. The adjustable arm and mount head offer flexibility, allowing you to position your phone for easy access.
5. LG
LG smartphone owners can enhance their driving experience with the iOttie Auto Sense 2 Dash & Windshield Car Phone Holder. The wireless charging feature eliminates the need for messy cables, making it a convenient option for LG users. The adjustable arm and mount head ensure that your phone is always within reach.
Advantages
- The automatic mounting system allows for quick and easy installation of your phone.
- The Qi wireless charging feature eliminates the need for additional power cables.
- The adjustable arm and mount head provide flexibility for optimal positioning.
- The secure clamping mechanism ensures that your phone stays in place, even during bumpy rides.
- The compatibility with various smartphone brands makes it a versatile option for different users.
Summary
The iOttie Auto Sense 2 Dash & Windshield Car Phone Holder with Qi Wireless Charging is a high-quality and versatile accessory for your car. It offers an automatic mounting system, wireless charging capabilities, and adjustable features to enhance your driving experience. With its compatibility with Google Pixel, iPhone, Galaxy, Huawei, and LG smartphones, this phone holder is suitable for a wide range of users. Invest in this product and enjoy the convenience and safety it provides.
Pros and Cons
- Pros:
- Quick and easy installation
- Wireless charging feature
- Flexible positioning
- Secure clamping mechanism
- Compatibility with various smartphone brands
- Cons:
- Power adapter not included
- Case compatibility limited to 6mm thickness
Question and Answer Section
Q: Is the iOttie Auto Sense 2 Dash & Windshield Car Phone Holder compatible with other phone models?
A: Yes, this phone holder is compatible with a wide range of smartphones. It supports Google Pixel, iPhone, Galaxy, Huawei, and LG devices.
Q: Does the iOttie Auto Sense 2 Dash & Windshield Car Phone Holder come with a power adapter?
A: No, the power adapter is not included. You will need to use your phone’s existing power adapter or purchase one separately.
Q: Can I use the iOttie Auto Sense 2 Dash & Windshield Car Phone Holder with a phone case?
A: Yes, the wireless charging feature works with Qi-compatible devices and cases up to 6mm thick. However, for the most efficient wireless charging experience, it is recommended to connect your phone without a case.
Q: How easy is it to adjust the position of the phone holder?
A: The iOttie Auto Sense 2 Dash & Windshield Car Phone Holder features an adjustable arm and mount head, allowing you to easily position your phone at the desired angle for optimal visibility.
If you want to find this product on Amazon’s website, search with this exact ASIN number: B0CMVB6M3V, or you can click the link below:
- Qi Certified Wireless Charging: Qi wireless charging delivers up to 10W of power to compatible Qi-enabled smartphones on contact without the need for additional power cables. Power adapter not included.
- Quiet Operation: The Auto Sense 2 features an Integrated servo motor operates at a minimal noise level to achieve a pleasant mounting experience. An internal battery allows the release buttons and clamping arms to operate for up to an hour after your vehicle is shut off.
- Fully Adjustable: The telescopic arm extends from 4.5” to 6.75” and rotates an a 260° arc; the mount head rotates, swivels, and titles a full 360°; and the bottom foot easily extends to accommodate extra large phones in both portrait and landscape mode.
- Case Compatibility: The wireless charging feature works with Qi compatible devices and cases up to 6mm thick. For the most efficient wireless charging experience, we recommend connecting your phone without a case.
- car phone holder mount cell phone holder car phone holders for car phone mount for car holder cellphone car cell phone holder for car mobile phone holder car mount for phone cell phone automobile cradles cell phone car holder mount porta celular
Here are top selling related products:
- 【Safe Wireless Fast Charging】：Built-in MCU and charging management IC chip with 6 protections, including over-current protection, over-voltage protection, over-heat protection, over-power protection, under-voltage protection, short-circuit protection
- 【Support Qi Charging】: Implement QI wireless charging standard, using type-c interface, can also access the positive and negative wires, type-c port input power: 5V/9V/12V/QC3.0, positive and negative input power: 9V-24V
- 【20W Fast Wireless Charging】: wireless fast charging module charging sensing distance of 0-8mm, automatic identification of the device's maximum wireless charging speed, support five charging power 20W/15W/10W/5W
- 【DIY Creativity】: The 20W fast wireless charger PCBA circuit board is suitable for DIY many kinds of wireless charging devices, which can be used for car wireless charging modification or fixed on furniture
- 【Note】:Please make sure that your device supports wireless charging, if the device does not support wireless charging, you can also use a receiving end to DIY a wireless charging module
- Inductive proximity switch type: LJ12A3-4-Z/BX, 3 Wire NPN NO. Detecting Distance: 4mm, Diameter: 12mm.
- Supply Voltage: 6-36VDC, Current Output: 300mA, Frequency: 500Hz.
- Wiring Method: Brown connect to Positive, Blue connect to Negative, Black connect to Load (signal output).
- When proximity switch is close to some target object, it will send out control signal.
- It is widely used in machine, paper making, light industry for limiting station, orientation taking count, speeding trial ect.
- AUTO SENSE: Motion sensing technology automatically opens and closes the cradle arms on the mount for a convenient and secure hold.
- Qi CERTIFIED: Wirelessly charge your iPhone (7.5W) or Android (10W) without connecting your phone to a power cable thanks to Qi-certified technology.
- ADJUSTABLE BOTTOM FOOT: The foot of the mount can be raised and lowered to accommodate phones of various sizes. This helps to align the Qi coils for an efficient charging experience.
- BACKUP POWER: Press either of the buttons on the side of the cradle to open the clamping arms and retrieve your smartphone. The Auto Sense has an internal battery that allows the arms to open for up to an hour after your vehicle is shut off.
- MULTIPLE INSTALLATION LOCATIONS: The mount contains two mounting brackets, one that connects to the CD slot and another that can be attached to your vehicle's air vent.
- AUTO SENSE: Motion sensing technology automatically opens and closes the cradle arms on the mount for a convenient and secure hold.
- Qi CERTIFIED: Wirelessly charge your iPhone (7.5W) or Android (10W) without connecting your phone to a power cable thanks to Qi-certified technology.
- ADJUSTABLE BOTTOM FOOT: The foot of the mount can be raised and lowered to accommodate phones of various sizes. This helps to align the Qi coils for an efficient charging experience.
- BACKUP POWER: Press either of the buttons on the side of the cradle to open the clamping arms and retrieve your smartphone. The Auto Sense has an internal battery that allows the arms to open for up to an hour after your vehicle is shut off.
- TELESCOPIC ARM: The newly designed telescopic arm pivots on a 225° arc and can be extended from 6.75” to 11”, allowing you to find the optimal viewing position.
- Qi wireless charger PCBA circuit board,allows to charge for any Qi-enabled device.
- Better for DIY, you can give it a case (not too thick) or fix it on your furniture or other devices, but please note the transfer efficient distance is only 5mm.
- Ultrathin,lightweight,safe and reliable.
- Package Included:2Pcs Qi Wireless Charger PCBA Circuit Board With Coil Pad Charging For DIY K9G9(If there are any problems with the product, please send us pictures?Tell us more details about this problem? ).
- Thank you so much for your purchasing from our store.Any question ,please feel free to contact us.
- Material: PCB, metal. Color: green.
- Input: 5V 2A, 9V 1.65A, 12V 1.5A. Output: 5V 1.5A, 9V 1.1A, 12V 1.25A.
- Packing quantity: 1 set.
- Features: wireless fast charging solution, USB-C interface, low temperature control, compatible with QC 18W and PD 18W.
- Purpose: This product is only suitable for mobile phones with wireless charging function, and the rated output power is 15W.
- Certified Safety Standards: Features CE/FCC/ROSH-certified circuitry with short-circuit and over-voltage protection. Ensures secure charging for smartphones and DIY electronic builds.
- Universal Qi Compatibility: Works seamlessly with all Qi-enabled devices, including and Android Supports 5W standard charging and 9V fast-charge emitters.
- Optimal Performance: Includes a magnetic spacer to align transmitters and receivers within 8mm range. Thin 1.1mm circuit board fits compact spaces.
- DIY Versatility: Ideal for custom wireless charging installations in vehicles, furniture, or portable gadgets. Weighs only 7g for minimal footprint.
- Complete Package: Bundle includes one receiver module and one magnetic spacer. Simplifies upgrades for retrofitting non-wireless devices.
- Output type:NO(Normally Open) PNP.
- Product type: Inductive Proximity Sensor Switch.
- Detect Object: Iron. Detect Distance:4mm±10%.
- Working Voltage: DC 6-36V. Wire Type: 3 Wire.
- Package include: 5 Pcs LJ12A3-4-Z/BY Inductive Proximity Sensor Switch.
- Inductive Proximity Switch Type: SN04-N, 3 Wire NPN NO. Detecting Distance: 4mm. Supply Voltage: 5-30VDC, Current Output: 300mA.
- LED working indicator: signal indicator, when sensing metal objects the light is on for normally open, the light is off for normally closed.
- Wiring Method: Brown connect to Positive, Blue connect to Negative, Black connect to Load (signal output).
- When proximity switch is close to some target object, it will send out control signal. Widely used for machine tool industry, frequency counters and other automatic control system, or you can use it for DIY 3D Printer.
- You will get 4pcs inductive proximity switch + 4pcs SN Bracket
- wire type and power: DC 3-wire type 12-24VDC
- Sensing side diameter : M08
- Sensing distance: 2mm
- Installation: Non-Shield(non-flush)
- Control output: NPN Normally Open
