As an Amazon Associate I earn from qualifying purchases.
Kingwin Performance LCD Fan Controller with Cooling FPX-002 is a versatile and efficient gadget that every electronics enthusiast should consider. In this review article, we will delve into the features, advantages, and applications of this impressive product.
Introduction
The Kingwin Performance LCD Fan Controller with Cooling FPX-002 is a cutting-edge device designed to enhance cooling and optimize fan speeds in your computer. This sleek and stylish controller takes your gaming or workstation setup to the next level by providing precise control over fan speeds and temperatures.
Features
- ABS Front Bezel: The FPX-002 features a durable ABS front bezel that not only adds an aesthetic appeal to your computer but also provides protection to the internal components.
- Controls and Monitors 3 Sets of Fan Speeds and Temperatures: With this fan controller, you can effortlessly control and monitor the speeds and temperatures of up to three different fans simultaneously. This allows you to achieve the perfect balance between cooling performance and noise level.
- Display Temperatures in Both F and C: The LCD display of the FPX-002 provides temperature readings in both Fahrenheit and Celsius, ensuring compatibility with different temperature scales and user preferences.
- Ultra-Fast Selection and Response Time: This fan controller boasts an ultra-fast selection and response time, allowing you to make quick adjustments to fan speeds without any lag or delay.
Applications
Gaming
In the gaming world, where high-performance hardware generates substantial heat, efficient cooling becomes paramount. The Kingwin Performance LCD Fan Controller with Cooling FPX-002 excels in this area by offering precise control over fan speeds. With this controller, gamers can fine-tune the cooling system to ensure optimal temperature management, preventing overheating that could hinder performance.
Workstations
Workstations often run resource-intensive applications that put a strain on the hardware. The FPX-002 fan controller provides a solution to manage the heat generated by powerful CPUs and GPUs. By adjusting fan speeds according to workload and temperature, professionals can maintain stable and reliable performance, even during demanding tasks.
Pros and Cons
Pros:
- Precise control over fan speeds
- Efficient temperature management
- Durable ABS front bezel
- Compatible with both Fahrenheit and Celsius
- Ultra-fast selection and response time
Cons:
- May require some technical knowledge for installation
- Limited to controlling three fans
- Does not support additional customization options
Question and Answer Section
Q: Can I use the Kingwin Performance LCD Fan Controller with Cooling FPX-002 with any computer?
A: Yes, the FPX-002 is compatible with any computer that has available fan headers and supports the necessary power requirements.
Q: Does the fan controller come with all the necessary cables?
A: Yes, the FPX-002 includes all the cables required for installation and operation.
Q: Is the LCD display backlit?
A: No, the LCD display of the FPX-002 is not backlit.
Q: Can I control the fan speeds manually?
A: Yes, the FPX-002 allows manual control over fan speeds, giving you the flexibility to adjust according to your needs.
Summary
In conclusion, the Kingwin Performance LCD Fan Controller with Cooling FPX-002 is a remarkable gadget that offers precise control over fan speeds and efficient temperature management. Whether you are a gaming enthusiast or a professional in need of reliable cooling, this fan controller is a valuable addition to your setup. With its durable construction, intuitive controls, and compatibility with various computer systems, the FPX-002 stands out as a top choice in its category.
If you want to find this product on Amazon’s website, search with this exact ASIN number: B01C1HE7D0, or you can click the link below:
Here are top selling related products:
- This DC12V governor can be controlled according to the ambient temperature of the fan speed, no manual control, automatic stepless speed, the higher the ambient temperature, the faster the fan speed control, saving energy and reducing noise.
- Whether it is a 2-wire, 3-wire or 4-wire fan (only connect power cable), whether PWM or brushless fans, as long as the fan voltage is within 12V, current less than 1A, the governor apply! Also can drive a of fans (total current must<1A). [3-wire/4-wire fans only need to connect the fan's power cord to the controller]
- The temperature sensor is connected with a cable in the form of mounting holes to facilitate detection of the temperature specified temperature point. Temperature probe is sealed with epoxy resin, waterproof and moisture-proof, the temperature probe maximum use temperature of 110 degrees. Sensor probe length: 300mm/11.5inch.
- Dual working mode optional, fixed starting temperature or adjustable starting temperature. Fixed mode temperature and temperature of 30°C(86°F), the governor control fan start, 30 to 50 degrees fan speed linear increase, 50°C(122°F ) above the fan at full speed. Adjustable mode start-up temperature range: 15 to 50 degrees, full speed range of 35 to 70 degrees (start and full-speed temperature difference of 20 degrees).
- Board size: 1.77x1.0x1.18inch/ 45x25x30mm (LXWXH), M3 mounting hole. ( Note that It is best to read the main picture instructions before use)
- Easy plug and play Thermospeed controller, temperature and speed control
- Auto cycle On/OFF at your desired temperature
- NTC temperature sensor for precise temperature control
- Solid state full-range speed control
- UL listed, 120V, 60 Hz, 3A FLA, 18A LRA
- Supports all internal 12V 5A fans, synchronous rectified output, high efficiency, no need for additional heat sinks even for high current operation.
- Multiple fans can be used in parallel (total current does not exceed 5A), support automatic temperature control and air cooling speed control, temperature control speed has four temperature zone settings, widely used.
- It can be turned on with the three-wire fan monitoring function (stall warning).
- Circuit load capacity: 5A for each output and 8A for bus current.
- Output range: 20%-100% for the first channel, or 40%-100% for the first channel (TFL = ON), 10%-100% for the second channel and the third channel. (Note: The above range is only applicable to the PWM range, the actual control effect will vary depending on the fan)
- Fan speed control module automatic temperature controller can automatically adjust the speed of fan according to the actual temperature. When the temperature is too low, it can made the fan stop running.
- To shut down the fan at low temperatures.
- Convenient to wire,Good materials,High quality.
- Temperature Measurement Error: 0~50℃ less than 1.2℃; other temperature ranges less than 2℃
- SHOP WITH CONFIDENCE: To provide you with the highest quality service, If you have any question, please contact us.We will provide after-sales service until you are satisfied.
- Circuit load capacity: maximum current per output 5A, the bus currents up 9A
- Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON)
- Working voltage: DC12V
- Stall alarm minimum speed: 700-800 rpm
- Temperature probe parameters: 50K B = 3950
- This is a PWM 4-wire fan temperature controller with two-way heat dissipation, temperature and speed display and stall alarm, wide operating voltage, dual independent temperature control, and support for push-button settings.
- If you have any questions about Fan temperature controller, please download the User Manual (PDF) from the “Product guides and documents” section to get all the relevant information about Fan temperature controller, thank you!
- Note:The working voltage must be equal to the fan voltage.If you use a 12V fan but supply 24V,it will burn the fan.This product is not limited by the fan current,but the pin current of the fan interface on the board should not be greater than 3A.If you use a higher current fan,please connect the fan power cord directly to the main power.
- Setting Note:In the setting state of speed and temperature zone,if there is no operation after 15 seconds,it will exit automatically without saving data.When setting the temperature zone,the full-speed temperature of the same channel must be at least 5℃ higher than the acceleration temperature.
- When setting a temperature value that causes this condition to be unsatisfactory,the controller will automatically adjust another temperature value to ensure that the difference is not low.In the condition of 5℃,this automatic adjustment is one-way,if need to call back,you need to manually adjust another temperature value.The shielding display setting of channel 2 only affects the data display of the working state.The control and parameter setting of channel 2 have no effect and work normally.
- Flex-A-Lite Variable Speed Controller with Electric Fan Relay Kit and Thread-In Temperature Sensor
- This variable speed fan controller has a built-in relay function, which means no need for external relays
- Flex-A-Lite Variable Speed Control Module includes 1/4-inch NPT threaded temperature probe with 3/8-inch and 1/2-inch thread adapters
- Car parts fan controller starts fans at 60 percent power and increases fan speed as the temperature rises, plus it runs fans for up to 25 seconds after the vehicle is turned off to remove excess heat from the radiator
- The Flex-A-Lite Variable Speed Controller is the perfect companion to automotive electric dual-fan systems
- Product Usage: The fan thermostat can automatically adjust or manually adjust the speed of the four-wire PWM fan, so as to dissipate heat for your computer in time and improve the running speed of your computer.
- Temperature Probe: Fan thermostat with temperature probe. When the temperature detected by the temperature probe is greater than the maximum acceleration temperature, the fan thermostat will make the fan work at full speed. When the temperature is below the minimum acceleration temperature, the fan thermostat will make the fan spin at the minimum speed.
- Buzzer Alarm: The fan thermostat with buzzer will sound when your FAN1 or FAN2 fan fails. When the fan resumes speed, the alarm will be automatically eliminated.Stall alarm minimum speed: 700-800 rpm.
- Specification: Working voltage: DC12V. Circuit Load Capacity - Current of each output: 5A(Max.); 3 fans working at the same time Maximum current: 9A.
- Package Content: 1 pcs DC 12V fan speed controller, 1 pcs DC female wire 20cm. Please note: The fan speed controller module only supports standard for Intel standard four-wire PWM fans, and cannot control non-standard reverse timing fans.
- 【Upgraded Temperature Control Design】 This upgraded cooling fan is specially designed for PS5 Slim Disc/Digital console. The fan is equipped with automatic and manual modes. With a built-in temperature sensor chip, the fan will automatically turn on/off by monitoring whether the temperature exceeds 36ºC/96.8℉. In manual mode, the fan runs at a speed of 4500 RPM.
- 【RGB Cool Linkage Lighting Effects】 In automatic mode, the cooling effect is enhanced through the fan and dynamic RGB linkage experience. The fan automatically switches between solid colors and gradient colors of light. With just a simple button press, you can switch between modes: press once to enter automatic mode indicated by the sensor chip light, press twice to enter manual mode, and press three times to turn off the fan.
- 【Smart Memory Start-Stop Function】The intelligent start-stop function allows the fan to automatically turn on and off with your console. It remembers your last fan setting, making it easy to maintain your preferred cooling level without having to adjust the settings every time.
- 【High-Speed USB 3.0 Hub Interface】 This cooling fan for ps5 slim accessories features a USB 3.0 hub interface that supports data transfer rates of up to 5Gbps. It also provides a charging function, allowing you to power other devices while you play, adding to its versatility and convenience.
- 【 Broad Compatibility】This cooling fan is widely compatible with various console models. It can be used with PS5 Digital Edition, Disc Edition, and the PS5 Slim Digital and Disc Editions, making it a versatile accessory for any P5 console.
- Accurate temperature setting and control
- The controller only controls the speed of the all standard four-wire chassis fan and CPU fan for
- It integrates manual speed regulation and automatic temperature control and speed regulation function
- When the corresponding open channel fan break down, the controller will alarm with sound and light (works with buzzle), alarm will automatically eliminated when the fan is rotated recovery
- When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed